Create an IP route

Unisphere provides monitoring and management for Internet Small Computer Systems Interface (iSCSI) directors, iSCSI ports, iSCSI endpoints, IP interfaces, and IP routes.

About this task

This topic covers the addition of an IP route for an iSCSI director. Addition of an IP route for a NVMe/TCP director is covered in the Create an IP route topic.

Steps

  1. Select a storage system.
  2. Select System > iSCSI to open the iSCSI dashboard.
  3. In the Actions panel, click Create IP Route.
  4. Select a director from the drop-down menu.
  5. Type a value for the Gateway IP.
    You specify an IPv4 or IPv6 address. You specify the IPv4 address in dotted decimal notation. You specify the IPv6 address in colon-hexadecimal format.
  6. Type a value for the Destination IP.
    You specify the IPv4 address in dotted decimal notation. You specify the IPv6 address in colon-hexadecimal format.
  7. Type a value for the Prefix.
    You specify an IPv4 prefix length value in the range of 1 through 30. You specify an IPv6 prefix length value in the range of 1 through 128.
  8. Optional: Type the value for the Network ID.
    The default value is 1. Valid values range from 1 through 16383.
  9. Click OK.